CVE mới & PoC public

1105 CVE

• CVE-2026-114136 Cao 7.5 CWE-409 22/10 03:17

  Django REST framework is a toolkit for building Web APIs. From 3.6.4 until 3.18.2, JSONParser.parse in rest_framework/parsers.py uses the client-supplied Content-Type charset value with codecs.getreader, which accepts byte-transform codecs such as bz2_codec rather than only text encodings. A remote unauthenticated client can therefore cause a compressed JSON request body to be expanded after Django has enforced DATA_UPLOAD_MAX_MEMORY_SIZE against only the wire bytes, allowing a very small request to consume substantial per-worker memory. The default parser set is sufficient, and any reachable endpoint that accepts a JSON body is affected. This issue is fixed in version 3.18.2.

• CVE-2026-114135 Cao 8.8 CWE-862 22/10 03:17

  Jupyter Server is the backend for Jupyter web applications. From 2.0.0 until 2.6.0, enabling GatewayClient.url replaced the normal KernelWebsocketHandler with WebSocketChannelsHandler, which authenticated the user but did not call authorizer.is_authorized(...) for the execute action on the kernels resource. A restricted authenticated user could therefore open an upstream kernel channel and obtain kernel execution despite the configured Authorizer denying that action, exposing data and credentials available to the kernel and permitting modification or disruption of the kernel environment. The default gateway configuration is fixed in version 2.6.0. In 2.6.0 and later, the same authorization bypass remains possible when a deployment manually registers the deprecated jupyter_server.gateway.handlers module, because its handler still omits the configured kernel-execute authorization decision.

• CVE-2026-112381 Cao 8.2 CWE-476 22/10 03:17

  Apache Traffic Server can crash with a null pointer dereference when a client POST request is torn down via half-close while a chunked origin response is being reparsed from a reentrant write-ready callback, a timing-dependent race introduced by the CVE-2021-32564 flow-control backports. This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

• CVE-2026-111815 Cao 7.8 CWE-295 22/10 03:17

  Apache Traffic Server can resume a TLS session across SNI virtual hosts without re-verifying a client certificate required by the resumed host's verify_client STRICT policy. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

• CVE-2026-111814 Cao 7.8 CWE-295 22/10 03:17

  Apache Traffic Server's default outbound session-sharing policy can reuse a pooled TLS session authenticated with one client certificate for a transaction configured to present a different one. This issue affects Apache Traffic Server: from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

• CVE-2026-111812 Cao 7.0 CWE-863 22/10 03:17

  Apache Traffic Server's origin_server_auth plugin lets a client force signing of attacker-chosen AWS request headers under the proxy's own credentials. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

• CVE-2026-111810 Cao 8.7 CWE-400 22/10 03:17

  Apache Traffic Server 9.2.15, 10.1.4 and 10.2.0 write one unthrottled diagnostic log line for every internal @ header they strip, so a request carrying many such headers makes the proxy write far more log data than the request contains. This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

• CVE-2026-111808 Cao 7.7 CWE-191 22/10 03:17

  Apache Traffic Server can be used to exhaust an HTTP/1.1 origin's worker pool via a malformed padded HTTP/2 DATA frame. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

• CVE-2026-111805 Cao 7.7 CWE-400 22/10 03:17

  Apache Traffic Server can be used to exhaust an HTTP/1.1 origin's worker pool via a truncated HTTP/2 Content-Length value. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

• CVE-2026-79976 Cao 7.1 CWE-476 22/10 02:17

  The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a data register selected while the packet buffer that register refers to had already been consumed and set to NULL by mctp_i2c_gpio_target_stop(). A controller on the bus can re-enter the same branch of mctp_i2c_gpio_target_stop() with a NULL buffer using two ordinary transactions and no authentication: first a normal packet write to MCTP_I2C_GPIO_RX_MSG_ADDR followed by STOP (which delivers and frees b->rx_pkt), then a bare read transaction followed by STOP. The failing read_requested() call leaves the stale state untouched and the I2C driver still delivers the STOP callback, which then calls mctp_bus_rx() with a NULL packet. The symmetric case exists on the transmit side, where the stale MCTP_I2C_GPIO_TX_MSG_ADDR selection dereferences b->tx_pkt->end after b->tx_pkt has been cleared and additionally signals b->tx_complete a second time, causing the next outbound packet to be dropped. The dereference happens in the I2C target interrupt handler, so on any target that traps accesses to address 0 the result is a fatal exception and a device reset or halt — a denial of service inflicted by any device able to act as controller on the shared management bus (for example compromised firmware on a peer MCTP endpoint or on the BMC). On parts where address 0 is readable, the impact degrades to a malformed packet buffer being handed to the MCTP stack and lost transmit packets. No attacker-controlled value is written and no confidentiality or integrity boundary is crossed. The fix resets b->reg_addr to MCTP_I2C_GPIO_INVALID_ADDR and clears b->rxtx at every STOP, so a new register must be selected before any data phase can run again. Only builds that opt into the experimental CONFIG_MCTP subsystem with CONFIG_MCTP_I2C_GPIO_TARGET=y are affected.

• CVE-2026-78118 Cao 7.0 CWE-362 22/10 02:17

  The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread() in kernel/sched.c removes an aborted thread from its wait queue while holding only _sched_spinlock, so the two paths are not mutually exclusive. When the last waiter is removed on another CPU inside that window, sys_dlist_peek_head() can return the list sentinel — a pointer into the k_timer object itself — typed as a struct k_thread * (with CONFIG_WAITQ_SCALABLE, rb_get_min() can return an arbitrary node of a tree being restructured), or it can return a pointer to a thread that has already been unpended and, for dynamically allocated threads, freed. The handler then calls unpend_thread_no_timeout(), which performs a sys_dlist_remove() through pointers read from that object, and arch_thread_return_value_set(), which writes unconditionally through the pointer. The result is out-of-bounds and use-after-free writes in supervisor context, plus scheduler state corruption; a milder outcome is a thread that has re-pended elsewhere being woken with a success return value from an unrelated blocking call. All of the primitives needed to drive the interleaving — k_timer_start(), k_timer_status_sync(), k_thread_create() and k_thread_abort() — are system calls, so with CONFIG_USERSPACE enabled an unprivileged user-mode thread can attempt the race against kernel-owned data. Exploitation requires a multi-CPU build (CONFIG_MP_MAX_NUM_CPUS greater than one; the affected region is a no-op on uniprocessor targets), local code execution, and winning a narrow timing window, so the practical outcome is most often a kernel crash rather than controlled corruption. The fix splits the helper into z_waitq_head_locked() for callers that already hold the scheduler spinlock and a z_waitq_head() that acquires it, and brings the timer expiration handler's head read, unpend and ready under a single LOCK_SCHED_SPINLOCK region.

• CVE-2026-19676 Cao 7.8 CWE-822 22/10 02:17

  The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver. Every in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus. The impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device. The fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length.

• CVE-2026-114268 Cao 8.6 CWE-119 22/10 02:17

  A flaw has been found in Tenda BE3L Pro 16.03.60.62. Affected by this vulnerability is the function formWifiBasicSet of the file /goform/WifiBasicSet. This manipulation of the argument security_5g causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

• CVE-2026-113870 Cao 8.6 CWE-116 22/10 02:17

  MongoDB Compass improperly escapes certain BSON values when converting a stored view’s aggregation pipeline into editable source. When a user connects to a MongoDB deployment containing a specially crafted view and opens that view for editing, the values can cause arbitrary code to execute with the privileges of the user running Compass.

• CVE-2026-111804 Cao 8.8 CWE-416 22/10 02:16

  Apache Traffic Server's experimental wasm plugin has a use-after-free in its transaction-close handler and forwards unvalidated guest-supplied metric IDs to the internal stats API. This issue affects Apache Traffic Server: from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 10.1.5 or 10.2.1, which fix the issue.