CVE mới & PoC public

1158 CVE

• CVE-2026-114508 Trung bình 6.5 CWE-470 22/10 05:16

  Laravel is a web application framework. From 12.45.0 until 12.68.0 and 13.27.0, crafted relationship inclusion on a read-only endpoint can trigger a destructive database operation on a related table instead of retrieving data. A user with read access but no write permission can empty related-table data, causing irreversible data loss, denial of service, and loss of data integrity. This issue is fixed in versions 12.68.0 and 13.27.0.

• CVE-2026-114501 Trung bình 6.3 CWE-226 22/10 05:16

  Pillow is a Python imaging library. From 11.2.1 until 13.0.0, Arrow export assumes that an image's rows are tightly contiguous and exports from im->blocks[0].ptr even when PILLOW_ALIGNMENT makes aligned_linesize include row padding or an aligned offset before the first row. The resulting Arrow buffer can include uninitialized padding, bytes preceding the first row, or stale heap contents from previously freed images. Applications that configure alignment and export images to Arrow can therefore disclose one user's pixels or other process memory to another user. This issue is fixed in version 13.0.0.

• CVE-2026-96641 Trung bình 6.5 CWE-190 22/10 04:20

  Pillow is a Python imaging library. Prior to 13.0.0, PILfont text-width accumulation in src/_imaging.c checks positive glyph advances against INT_MAX but does not check negative advances against INT_MIN. Repeating a signed 16-bit advance of -32768 can therefore execute a signed C integer overflow in xsize += dx, producing a large positive width from a negative mathematical result. Applications that use getlength(), getsize(), or derived layout, quota, serialization, or allocation calculations can experience logic-integrity errors or resource consumption, while the high-level mask path commonly retains a decompression-bomb check. This issue is fixed in version 13.0.0.

• CVE-2026-96638 Trung bình 6.5 CWE-400 22/10 04:20

  Pillow is a Python imaging library. From 9.1.0 until 13.0.0, BmpRleDecoder.decode() in src/PIL/BmpImagePlugin.py permits crafted RLE BMP delta escapes and absolute-mode runs to append beyond the remaining dest_length without a per-branch cap. A delta can add roughly 255 image rows in one iteration, so a kilobyte-sized file with a large but permitted width can expand the data bytearray to hundreds of megabytes or more, causing memory-exhaustion denial of service. This issue is fixed in version 13.0.0.

• CVE-2026-96636 Trung bình 6.5 CWE-400 22/10 04:20

  Pillow is a Python imaging library. Prior to 13.0.0, MpoImageFile.seek() and DcxImageFile.seek() reparse later MPO or DCX frames and replace self._size without rerunning Image._decompression_bomb_check(). A crafted multi-frame image can use a tiny first frame to pass Image.open() and then declare an over-limit later frame. Normal frame iteration through seek(), load(), or ImageSequence.Iterator can decode that frame and commit hundreds of megabytes or more, causing memory-exhaustion denial of service. This issue is fixed in version 13.0.0.

• CVE-2026-114406 Trung bình 6.8 CWE-295 22/10 04:17

  The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites. Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed.

• CVE-2026-114379 Trung bình 5.3 CWE-73 22/10 04:17

  A flaw has been found in EKKOLearnAI ekko-studio up to 1.0.6. This vulnerability affects the function saveGeneratedImages of the file packages/server/src/modules/studio/controllers/media.ts of the component Media Generation API. This manipulation of the argument output_path causes file inclusion. Remote exploitation of the attack is possible. Patch name: 1d42459c292f89e412f7f6243829e7fed2e85bf5. It is recommended to apply a patch to fix this issue.

• CVE-2026-85518 Trung bình 6.1 CWE-22 22/10 03:17

  A flaw was found in OpenSCAP. When decomposing a Source DataStream (SDS) file, the application does not properly validate relative file path attributes, leading to a path traversal vulnerability. An attacker can exploit this flaw by tricking a user or automated system into decomposing a crafted datastream containing directory traversal sequences. Successful exploitation allows unauthorized file creation or modification outside the intended target directory with the permissions of the executing process.

• CVE-2026-114438 Trung bình 4.2 CWE-287 22/10 03:17

  A flaw was found in the Update User Locale required action of the Keycloak identity and access management solution. When this action is ordered before the Configure OTP action in a realm, the system may fail to enforce mandatory multi-factor authentication enrollment during the login process. This issue allows an attacker with a valid password to access an account without setting up the required one-time password (OTP) credential.

• CVE-2026-114362 Trung bình 5.3 CWE-918 22/10 03:17

  A flaw has been found in HarnessRouter up to 0.31.12. This impacts an unknown function of the file gateway/app.py of the component Targets Test Endpoint. Executing a manipulation of the argument base_url can lead to server-side request forgery. The attack may be performed from remote. Upgrading to version 0.31.13 will fix this issue. This patch is called 1c4b1fc1f89737dabd089ac1d1c174a57f764e28. It is suggested to upgrade the affected component.

• CVE-2026-111817 Trung bình 6.9 CWE-400 22/10 03:17

  Apache Traffic Server can stall a chunked transfer that it passes through with its trailers removed (proxy.config.http.drop_chunked_trailers) until the connection times out, because it waits for the trailer bytes it has already dropped. Trailer dropping is on by default in 10.x. In 8.1.11 and 9.2.x it is off by default, and those versions are affected only if it is enabled. This issue affects Apache Traffic Server: 8.1.11, from 9.2.5 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 10.1.5 or 10.2.1, which fix the issue.

• CVE-2026-111809 Trung bình 6.9 CWE-444 22/10 03:17

  Apache Traffic Server allows request smuggling via HEAD requests that carry Content-Length or Transfer-Encoding. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.

• CVE-2026-78119 Trung bình 6.3 CWE-787 22/10 02:17

  The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all in-tree NPCX/NPCK SoCs). Both the loop counter and the word count were uint8_t, so the copy ran up to 255 iterations. An eSPI controller that emits a flash request whose header claims a payload larger than the negotiated maximum therefore drives up to 239 32-bit stores past the end of the structure — roughly 956 bytes of out-of-bounds write into .bss — from the eSPI flash receive interrupt handler, while the source reads walk past the end of the 18-word FLASHRXBUF register array into neighbouring eSPI registers. The same unvalidated length was then passed on to flash_write() in espi_taf_npcx_flash_write() with the 64-byte src buffer as source, reading up to 4 KB of adjacent controller SRAM into SPI flash at a host-chosen address, where the host can read it back. A related fixed-size stack buffer in taf_npcx_completion_handler() was overflowed by four bytes on the maximum-size completion path on SoCs whose tx-plsize is 64. The defect is reachable only from the eSPI host side, and only by a request that violates the negotiated payload size, so it requires host firmware or bus-level control rather than ordinary host software; a compliant maximum-length write fits the buffer exactly and is handled correctly. Because TAF exists specifically so that the embedded controller arbitrates host access to shared flash (espi_taf_check_read_protect() / espi_taf_check_write_protect()), corrupting controller memory from a host-supplied field crosses the trust boundary the feature asserts; consequences range from controller crash or hang to corruption of driver state that gates the flash protection regions. The fix widens the counters, rejects any request whose word count exceeds both ARRAY_SIZE(FLASHRXBUF) - NPCX_ESPI_FLASH_HEADER_ADDRESS_LEN and NPCX_TAF_RX_PAYLOAD_WORDS (derived from the devicetree rx-plsize), marks such packets with a new invalid_flag so espi_taf_work() answers them with an unsuccessful completion instead of processing them, bounds the transmit payload against FLASHTXBUF, and adds a default case for unsupported cycle types. Only configurations with CONFIG_ESPI_TAF enabled on an NPCX/NPCK target are affected; no in-tree board enables it by default.

• CVE-2026-78117 Trung bình 4.2 CWE-362 22/10 02:17

  The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate. When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call.

• CVE-2026-78116 Trung bình 5.2 CWE-415 22/10 02:17

  The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return. Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice. The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient. Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected.